Hydro Jetting and Snaking- Everything that You Should Know
Experiencing plumbing issues like a clogged drain and blocked sewage pipes is quite common for homeowners. However, no one wants them to happen. But if it happens even, there’s nothing to be depressed!! If there’s a problem, there’s always a solution! Today’s post talks about two fantastic plumbing solutions that can help you in unclogging your drain or sewage pipes effortlessly. Plumbers call them hydro jetting and snaking.
To know more about these extraordinary techniques related to drain cleaning Melbourne or that of any other region, keep reading this post!
Let’s Start With Snaking…
Snaking is a classic approach to unclog the drain. With this method, the plumber takes an auger. Auger is like steel cable that has a coil; similar to cork-screw in one end. It works as a piercer when a plumber inserts it in the sewage pipe. With the help of the auger, the plumbers remove obstructions, and your clogged drain becomes unclogged.
What are the Benefits of Snaking?
Snaking has proven effectiveness. There’s no better alternative than snaking if you want to clear basic drain clogs. Moreover, it doesn’t harm the sewage pipes. It’s a gentle process that can be used for old pipes as well. Besides, since snaking is efficient in removing obstacles from the drainpipe, it warns you about critical issues like the presence of a harmful object in the line.
In a one-liner, if you want to clear basic clogs from your sewage pipes, snaking can do wonder! However, every good comes with some touch of evil. And snaking is of course, not an exception to the fact. It’s not a permanent solution, and there will always be the risk of clog accumulation in the future.
Now it’s the Time to Focus on Hydro Jetting!
Hydro jetting is the process, in which a plumber forces a stream of water in the sewage pipe. The pressure is set at 3000-8000 PSI (Pound per Square Inch). This is such a massive pressure that it can easily blow out any obstacles in the pipelines. The list includes hair, grease as well as tree roots.
What are the Benefits of Hydro-Jetting?
Hydro jetting is one of the most effective methods of cleaning ornery drain clogs. For this reason, it’s highly recommended for cleaning complicated drain clogs. Besides, it’s a versatile method that can be used for both residential and commercial purposes.
The only downside of hydro jetting is none other than its forceful approach. For this reason, it’s not suitable for old or damaged pipelines.
What’s the Best Method to Clean Drain Clogs, Snaking or Hydro-Jetting?
Well, it entirely depends on the severity of the clog and the condition of the pipes. Hydro jetting works as a power-pack. On the other hand, snaking works as the primary method of clearing clogs. To know what the best fit solution is for you, consult with an experienced plumbing agency. They will help you in making the right decision.
However, when you call a professional plumber, make sure you’ve requested them to conduct a holistic check. It will help you to detect several issues like the need for hot water system replacement Melbourne or in other areas, carbon monoxide test etc.
So, what’s stopping you? Ring up the best plumbing agency near you today and get your job done at the earliest.