Search the Community
Showing results for tags 'led'.
Found 3 results
Living a green existence can make you feel like you’re doing something positive for the planet. It can actually lead to positive outcomes, too. If you want your consumption of energy to be as kind to the environment as possible, you should adopt any or of all of these strategies at your place of work or in your household right away. Switch Your HVAC Filters out on a Frequent Basis Heating and cooling a home can eat up a considerable amount of energy. If you want to minimize your energy use in a big way, you should switch out your heating and air conditioning system filters on a frequent basis. This will do more than conserve energy as well. That’s because it will also make your monthly energy bills a lot lower. Invest in LED Lighting The use of LED (Light Emitting Diode) lights calls for markedly lower levels of energy. If you want to minimize your energy consumption greatly, you should switch all of your existing lightbulbs out with fresh LED ones. This may require an upfront investment of money. If you wait a little bit, however, you’ll save a lot on your energy bills each month. Reuse Energy-Efficient Industrial Transformers over and Over You can decrease your energy use by going for industrial transformers that are classified as being energy efficient. People who want to keep waste to a minimum should think about reusing any tools, like an industrial transformer, whenever possible. If you use industrial transformers in the workplace, you shouldn’t forget about them once they’re no longer brand new. Using them over and over can minimize waste greatly. Use Ceiling Fans Any Time You Can You should never assume that turning your air conditioning unit on is the only way to cool your property down well. If you want to cool an interior space without employing a lot of energy, you should try ceiling fans. Ceiling fan installation can be terrific for people who want to lower energy consumption. It can be fantastic for those who want to lower their energy bills as well. If you care deeply about the environment, the world and a brighter tomorrow, you need to take the appropriate actions day in and day out. This means that you should do whatever you can to restrict your use of energy. This is crucial regardless of your location. It can help to decrease energy use at home, at work and beyond.
RachelleW posted a blog entry in Shades of an Apple Green HomeYou do not have to be a diehard environmentalist to want to do your part in preserving resources for future generations and leaving less of a carbon footprint behind. You may be like many homeowners who have a desire to have your home be more environmentally friendly, but you just do not know how to go about it without it costing a fortune or being inconvenient. Here are some easy ways you and your family can make your home more environmentally friendly. LED Bulbs Incandescent bulbs are going the way of the dinosaur. Except for some specific applications, such as oven bulbs, incandescent bulbs are being phased out. California plans to have them phased out, with exceptions, by 2018. You may have noticed how hard it is to find incandescent bulbs in some hardware departments nowadays. Compact fluorescent (CFL) bulbs and LED bulbs only use a fraction of the energy needed to power the hot incandescent bulbs. LED lights use the least amount of electricity. You may have had mixed results using CFL bulbs in the past, but new types are available to provide instant full light and will work in the cold for outdoor fixtures. However, LED bulbs are the best at using less electricity. Swapping all the bulbs you can to LEDs can save money on your electric bill, eliminate the need to change a bulb for many years, and be quite earth friendly in the process. HVAC Upkeep Your heating, ventilation and air conditioning system use the most energy in your home. Furnaces often use natural gas or another fossil fuel along with electricity to run a blower or pump, making the furnace the costliest appliance in your home to run. Your AC system is second. Dirty filters, grime on condenser and evaporator coils, corroded burners, and more can cause electricity to be wasted for air conditioning and fuels used for heating. Some companies, like Classic Air and Heating, know that it is important to at least get an annual inspection service and cleaning performed to keep your furnace and central air conditioning system operating at peak efficiency. You save on energy costs and reduce your carbon footprint, which is helpful to the environment. Recycle There are some areas of the country that do not yet have a weekly pickup day for recyclable materials. Many neighborhoods collect recyclables separately, but some people do not participate in the program and throw away recyclables in the regular trash instead. Many people start by recycling aluminum cans and newspapers. A single recycled aluminum soda can saves the amount of energy required to operate a television for three hours. Even if you start small with just recycling aluminum cans or newspapers, you are making your home more earth friendly. Unplug Chargers and Turn off Lights Those power pack chargers that regenerate the batteries in your tablets, cell phones, and laptops use electricity even when they are not connected to the device they are intended to charge. The amount is small, but there are millions of them plugged in all over the country. Connecting them to a power strip that can be physically shut off with a switch can save energy. Turning off the lights when you leave a room is another easy way to save energy. You should also turn off televisions and other appliances that are not being used. Televisions and monitors still use a little bit of electricity in standby mode, but not as much as when they are operating. Imagine the energy savings if every home in the country participated in even casual energy saving protocols and minimal recycling. You may not be able to get all of your neighbors on the bandwagon of becoming more earth friendly, but you can at least motivate your family to take a personal concern for the natural resources we share in this finite world.
There are quite a few lighting options for those who wantto make their homes greener and more environmentally friendly. We will take a look at some of the best and most commonly used ones and see how they compare to traditional lighting methods. CFLs Compact Fluorescent Lights, or CFLs, are those twisty light bulbs that give off very bright light. They can actually come in quite a few shapes, but they are most easily recognized in their spiral form. The average CFL will keep working for around 10,000 hours. Compare that to traditional light bulbs (incandescent bulbs), which only last for about 1,000 hours. So while the CFL bulbs do cost a bit more, you will easily save money on them over time. CFLs also emit less heat than their incandescent counterparts. So your house will stay cooler, and you will spend less on air conditioning in the summer months. The only downside to these is that they do contain mercury, so you have to be careful about how you dispose of them. Many cities have a special program for CFLs, so check with yours to see what is offered as a safe method of disposal. LEDs Light emitting diodes, more commonly called LEDs, give off light consistently for as long as 40,000 hours. Now they are a bit more expensive than any other light bulb you can get, but they are also the longest lasting. By choosing LEDs, you cut down on the amount of waste going in to the environment and you can save quite a bit of money over time. Another benefit of these bulbs is that they use very little energy. Studies show the average LED uses as much as 90% less energy than even a CFL. That can give you some serious energy savings. If you want to save on your energy bill, just changing out your light bulbs can be an effective first step. If you are worried about theinitial cost of these bulbs, you can take comfort in knowing that their cost is slowly declining. They may never reach the very low cost of incandescent bulbs, but they don’t need to in order to save you lots of money. Save the Environment through Your Lighting. There are other ways you can cut down on energy costs and ensure that your lighting methods are protecting the environment. One of the easiest ways to do that is to use natural lighting as much as possible. By opening windows and curtains instead of turning on a light, you will make your bulbs last longer and save yourself some money on your energy bill. Natural sunlight is also healthier for your skin, eyes and mental state. If you have any power strips or wall warts that are plugged into the wall, be sure to unplug them when you aren’t using them. These can become warm even when they are not in use, which means that they are drawing power from your outlets even when you aren’t actively using them. This applies to power bricks for computers, laptops, chargers and video game consoles as well. One of the old energy-saving standbys is to turn off lights when you are not using them. But do you know how long you need to be absent from a room to actually make turning off your lights worthwhile? It’s important to know since constantly turning on and off lights depletes their lifespan quickly. So if you are using conventional incandescent bulbs, you should turn off the lights every time you leave the room, even if it is just for a few seconds. For CFLs, you can turn off the light if you plan to be absent from the room for more than a few minutes. And for LEDs, you wantto turn them offonly if you plan to be gone more than 15 minutes. For more information on LED bulbs and lighting visit Led hut.co.uk