Everything posted by Derek Honeybun
What is condensation? The word condensation may remind you of your general science classes back in school! Condensation happens when water vapor comes in contact with a surface whose temperature is lower than its surrounding air. This simple concept causes dew on a hot humid day or rain falling from clouds on a cold day. Window Condensation Window condensation is a commonly occurring phenomenon especially in winter that occurs when external temperatures drop and internal temperatures are warm. The warm water laden air comes in contact with the cold window surface resulting in condensation. This can be caused by faulty window panes or lack of air flow across a window surface that is covered. Whatever be the reason, if this is happening it is sign that your windows need your attention because the surplus moisture will be absorbed by the walls causing mold and mildew. Professional window installation goes a long way in preventing this condition. Managing Window Condensation Window condensation can be attributed to several factors, poorly manufactured windows and inefficient sealing being most common of them. It is of utmost importance that the windows and doors are installed and sealed well. Here are a few ways you can avoid window condensation: Ensure that your home is amply ventilated by switching on ceiling fans and exhaust fans in bathrooms and kitchens especially when you have hot liquids cooking or hot water running. This shall allow warm air movement preventing it from condensing. Do not set the thermostat at very low levels as colder the air, the lesser is its ability to retain moisture encouraging it to condense and settle on windows and mirrors in your home. Invest in a hygrometer to measure the humidity levels inside your home that should ideally be between 35%-40%. Also it is wise to install a de-humidifier inside your house to regulate and manage humidity at optimum levels. If you notice condensation on a window, wipe it with a dry soft cloth to prevent excess moisture leaking into adjoining walls. Check seal of windows to ensure that there aren't any gaps. Also check for any cracks on glass panes that may cause condensation. If your windows are very old you can also consider replacing them for better heat retention. Flawed manufacturing of windows is often considered a major reason for condensation on your windows. But inability to manage internal humidity is also a cause for the same. So along with checking the condition of your windows, try controlling the moisture inside your home.
Windows demand repairs and replacements owing to wear and tear with passage of time. They are subjected to harsh climatic conditions that affect their performance over the years. Damaged windows allow in drafts of cold or hot air, water leaks, etc. affecting indoor temperatures and ultimately leading to high energy bills. This can be controlled by paying close attention to the condition of windows and taking adequate action to make sure that they are back in shape. If a close inspection of your windows reveal that they need to be replaced, here are a few facts that you should be clear about before going about it. Replacement does not mean replacing EVERYTHING! When replacing a window you ought to know that only the movable parts are replaced and in most cases the frame remains pretty much the same. The glass, the panes, sashes, etc. and other movable parts depending upon the kind of window are replaced for most window repairs and replacements. Also simply restoring the damaged part like a broken or cracked glass, cracked seal, defective pane, etc. can also serve the purpose and render a window as good as new. It is not advisable to rip of the entire window including the frame as this calls for structural changes that take more time and more expensive and involve a bit of brick and mortar reconstruction as well. However, this option can be exercised in case the frames are extremely damaged and only reconstructing the entire thing will help alleviate the problem. Replacing windows is NOT a DIY project It is important for all home owners to remember that window replacement is not a Do-it-yourself project and that it needs professional expertise. Trained technicians from most windows and doors companies have the skill and equipment to deal with such conditions in the most professional manner. Trying to mend windows on your own account is wastage of time and other precious resources. Research well before choosing a service provider There are many big names of windows and doors companies around and it can be pretty daunting for home owners to choose one. Conducting exhaustive research on each of them and comparing their services as well as prices will help decide whom to choose. Reputed brands are always good to work with but they are more expensive than the rest. Also ask for referrals from friends and neighbors. Ascertain cost of replacement and create budget accordingly Replacement of windows can be quite a pricey affair. However this largely depends on which brand you choose, what kind of window you install, whether it is partial or whole replacement, etc. Compare prices of various companies to arrive at an approximate figure and create a provision accordingly.
Needless to say, upgrading to new energy efficient windows in your home is a sure shot way to control humidity levels inside. What is crucial here is your choice of company that shall do the job for you. You will come across countless such window companies in Edmonton who offer these services and it may be a tough task to choose one. Though most promise excellent window installation services, not all are to be believed despite good prices because most of these disappear when problems arise in the long run. Therefore it is important that you go with a trusted name that shall help you resolve issues well past installation. Improper window and door installation not only affects the energy efficiency of the home but also allows water leakage into the home which can be extremely damaging for the house. For a flawless installation ensure the following: The window installation should make the room air and water tight It should insulate the roomInstallation process should not affect the shape and look of the windowProcedures like flashing on the exterior and caulking should be done neatly for maximum effectiveness Partial or whole Replacement of windows When you feel the need of window replacement in Edmonton, you have two options that of a retrofit or a complete tear out. A retrofit means a window and door installation in the existing frame where the window or door is being replaced. This is a faster as well as cheaper process and may not always create the perfect seal as desired by you. A complete tear out on the other hand is pulling down of the entire door or window along with the frame and installation of the entire unit. This process requires professional expertise and if done appropriately will help create the perfect seal enabling better humidity control inside your home. As a home owner you also need to keep in mind that a certain level of humidity is desirable inside your home even in the cold winter months. You can install a humidifier to keep the levels in check and also if you find condensation on the windows it is sign that humidity is higher than necessary. To control excess humidity, you can adopt a few steps like: Amply ventilate moisture laden areas like bathrooms, wash rooms, kitchen etc. by installing fans and exhausts that vent outsideAvoid keeping too many indoor plantsControl humidifiers installed at various places in the homeAt the end of the day, all you have to ensure is that your window replacement in Edmonton is done by trusted and experienced people in the business who can insulate and create energy efficient homes for you.