Jump to content
Green Blog
  • entries
    0
  • comments
    0
  • views
    766

About this blog

steel-shell-Induction-melting-furnace.jp

It can be a serious situation when your electronic devices do not work as expected; it is particularly serious when you use the specific device for something important like cooking. You could also use the machine for your business errands.

There are some cases where you have to do a quick fix on your electric equipment especially if you need it for a project you are undertaking presently. There are times when there is a lot of work that needs to be done and you encounter the unfortunate situation where your devices give way, in these situations it will be very helpful knowing some simple solutions to common technical problems.

Just like you know some troubleshooting techniques to apply when your phone is not working, you can also learn some trouble shooting techniques for your induction furnace so that you can quickly find a solution to the problem. Here are some techniques you can apply;

  • When the furnace does not run.

One possible cause is that there is no power, what you can do in this case is to check for blown fuses or if there are tripped circuit breakers at the main entrance panel. If this is the problem proceed to restore the circuit.

The switch may be off so in this case you can use a separate power switch. There could also be a motor overload and to solve it you should wait about thirty minutes then press the reset button. If it does not work you can repeat the process.

  • When the furnace goes on and off repeatedly.

One cause of this situation could be that the filter is dirty and all it needs is just some cleaning, in some cases if the filter has been neglected for a long time it may just need a replacement.

Another cause of this problem could be that the motor or the blower needs lubrication; all you need to do is just lubricate the parts through the oil ports. The blower could also be clogged with dust and other materials; you can fix it by cleaning the blower assembly.

  • When the blower will not stop running.

The blower could be set incorrectly; you can set it correctly by changing the thermostat form ON to AUTO. The relays could also be faulty at this time you can call a professional to help, you shouldn’t risk dealing with by yourself. The relays are a sensitive part to handle and you need some knowledge and training on fixing them. Call a contractor to check this area on your behalf.

These troubleshooting techniques will be sure to help you get your induction melting furnace start working with a quick fix. Sometimes however, you may encounter a situation that can seem quite complicated; you should call a professional to help you out. Use the tactics when you are sure that the problem can be fixed in a short time. Don’t let a small issue bring your operations to a standstill with a quick fix you can be up and running again.

Mandy Ye is the author of this article on induction furnace. Find more information, about induction melting furnace.

 

Entries in this blog

No blog entries have been created

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. We use cookies and other tracking technologies to improve your browsing experience on our site, show personalized content, analyze site traffic, and understand where our audience is coming from. To find out more, please read our Privacy Policy. By choosing I Accept, you consent to our use of cookies and other tracking technologies.